FASTER
Get through repetitive notching work sooner.
-
-
FASTER, CLEANER ROOF NOTCHING - WITHOUT THE TIN SNIPS.
EERA Notchers are purpose-built roofing tools that help roofers cut ridge caps and flashings faster and more consistently — without measuring, marking or relying on years of hand-cutting experience. Each Notcher is shaped around a specific roof profile, so it self-centres on the rib and produces the same clean cut, time after time.
SEE WHAT HAPPENS WHEN YOU STOP DOING EVERY CUT BY HAND.
Roofers have traditionally used reds and greens to measure, mark and scribe every flashing or ridge-cap profile by hand.
EERA changes the process.
The body of each Notcher is shaped around its specific roof profile, allowing the tool to self-centre over the rib before making the cut.
In one six-metre side-by-side test:
Position it. Cut it. Move on.
TIN SNIPS
7 minutes
VS
EERA NOTCHER
3 minutes 20 seconds
And the roofer using the snips was one of the best in the business.
Results vary depending on profile, operator and application.
THE EXPENSIVE PART ISN'T THE SNIPS, IT'S THE LABOUR.
A good pair of reds and greens will always cost less than an EERA Notcher.
But that's not the real comparison.
The real cost is paying qualified roof plumbers to spend hours measuring, marking and hand-cutting the same profiles, job after job.
EERA Notchers help crews work faster while producing clean, repeatable cuts that don't depend on who's holding the tool.
Commercial customers have told us they've saved up to a full day's labour on suitable jobs, while many EERA customers say their Notcher quickly paid for itself through the time it saved.
CONSISTENT
The same profile. The same cut. Every time.
-
-
EASIER TO DELEGATE
Give repetitive cutting work to less-experienced team members while your senior staff/qualified roof plumbers focus elsewhere.
-
-
LESS REPETITIVE SNIP WORK
Reduce hours spent making the same left-and-right cuts by hand and minimise the strain of repetitive cutting.
-
-
START WITH YOUR ROOF PROFILE
DON’T ASK US IF THEY ARE WORTH IT, ASK THE ROOFERS USING THEM
WORTH EVERY DOLLAR, SAVES OUR COMPANY THOUSANDS”
We use the Trimdek notcher on commercial projects - without the notcher, it takes two workers a day and a half to notch out 180 meters of ridge by hand, with the notcher it cuts the job down to just 3 hours and your left with a consistent perfect notch every time. Worth every dollar, saves our company thousands.
EXACTLY WHAT THE INDUSTRY HAS NEEDED FOR YEARS”
I purchased the Trimdek Notcher back in November, and it has truly been a game-changer. It’s incredibly easy to use and works super fast, saving a lot of time on the job. This tool is exactly what the industry has needed for years! The quality of the build is top-notch, and you can really tell it's made to last. Highly recommend it to anyone looking to improve efficiency and precision on-site.
PAID FOR ITSELF IN ON JOB”
Got this tool recently, has saved us so much time already, paid for itself in one job. Many more to come.
Frequently Asked Questions
Every EERA Notcher is designed around a specific roof profile. The challenge is that profile names can differ between manufacturers, suppliers and locations. Use our Profile Finder to identify the closest match. If you're still unsure, contact us before ordering and we'll help you check it.
No. The body of each Notcher is shaped around its specific roof rib so it can self-centre correctly. The blades are replaceable, but they are not interchangeable between different profile types.
No. EERA Notchers are designed for flat, straight runs and are not currently designed for angled hip cuts.
Most current orders leave our Warrnambool workshop within one business day. Because every EERA Notcher is handmade and assembled by our team, there can occasionally be delays. We recommend allowing up to five business days for processing during busy periods. Shipping is generally: Standard: 5–10 business days Express: 1–3 business days. Express shipping receives the fastest available processing and delivery.
Need your Notcher for an upcoming job? Contact us before purchasing and we can confirm current availability
Every EERA Notcher is backed by a 12-month warranty.
NOT SURE WHICH NOTCHER YOU NEED?
You're not the only one.
Roofing profile names aren't consistent, the same profile may be called Trimdek, Trimclad, Monoclad or 5-Rib depending on who manufactured it, where you bought it or even which state you're working in.
And because every EERA Notcher is built around a specific rib shape, choosing the right profile matters.
That's why we created the EERA Profile Finder, answer a few simple questions and we'll help point you towards the correct tool.
AUSTRALIAN DESIGNED + MADE
Designed, fabricated and assembled by our team in Warrnambool, Victoria, Australia.
BUILT FOR REPEAT USE
Heavy-duty construction with hardened steel blades.
REPLACEABLE + SHARPENABLE BLADES
Replacement blades are available and can be sharpened to extend their working life.
12 MONTH WARRANTY
Every EERA Notcher comes with a 12-month warranty. We've been selling EERA Notchers for more than three years and have experienced extremely few product faults or warranty returns.
MADE BY PEOPLE WHO UNDERSTAND MACHINERY
Backed by more than 20 years of machining, manufacturing, tool making and sheet-metal machinery experience.
